more
0 items
 
Advanced Search
English French


Official PayPal Seal
Privacy Notice
Conditions of Use
Payments, Shipping & Returns
About Us
Contact Us
Bastl Instruments Skis DIY Kit
[skisdiykit]
$110.00

Before starting this kit, prepare the following tools: Soldering iron (15-20W will do), multi-meter, protective eyewear, flush cutters, n2. hex screwdriver or allen key, phillips screwdriver and some coffee. Also briefly go through this guide and make sure that you understand all the steps, if you are having any troubles don’t hesitate to seek help at the forum.

We suggest that you work in a clean and a well lit environment to avoid accidents or losing any of the small components.

Dual decay + vca.

In the front of every ski there is a curve similar to a decay envelope. Skis module has two channels A and B and each of them consists of a decay envelope with knob control and a VCA. There is a TRIGGER input to trigger the envelope, a buffered envelope output which is normalised to the CV input of the VCA. Than there is SIGNAL IN and OUT of the VCA.

There is also a CRUNCH switch which activates a special mosfet lo-fi VCA circuit inspired by designs of Standa Filip. This adds a slight crunchy character which changes with the decay of the envelope.

A typical application of Skis is to take two signals (noises for example) and generate drum sounds with adjustable DECAY from them with a TRIGGER signal. However, you can also use the two VCAs and two DECAY envelopes independently.

Features:

  • dual decay envelope with adjustable decay time (trigger input, CV output)
  • dual vca (signal IN, signal OUT, CV IN is normalized to CV output of decay envelope)
  • crunch feature inspired by circuits of Standa Filip
  • jumpers for changing the decay envelope to release envelope (vca is on full while there is a gate signal and than it decays)
  • jumpers for enabling the decay knob to completely mute the decay envelope
  • jumpers for selecting weird filtering of the output signal (also inspired by Standa Filip)
  • front panel from oak wood, handmade custom knobs
  • handmade in Brno, Czech republic

Technical details:

  • 5 HP
  • current: +12: <30mA, -12: <20mA
  • 35mm deep (skiff friendly)
  • PTC fuse and diode protected 10 pin power connector


For more information, please visit this products webpage.
For stock information, please email info@moogaudio.com.
This product was added to our catalog on Monday 21 December, 2015.
Reviews
Customers who bought this product also purchased
Delptronics LDB-1X
Delptronics LDB-1X
Bastl Instruments CV Trinity Expander DIY Kit
Bastl Instruments CV Trinity Expander DIY Kit
Synthrotek VCA Kit
Synthrotek VCA Kit
Audio Damage ADM18 Shapes
Audio Damage ADM18 Shapes
Verbos Electronics Multiple
Verbos Electronics Multiple
Malekko AD/LFO
Malekko AD/LFO
Tip Top Audio ZDSP Dragon Fly
Tip Top Audio ZDSP Dragon Fly
$86.00  $43.00
Pittsburgh Modular Toolbox
Pittsburgh Modular Toolbox
$189.00  $151.00
Synthrotek Ribbon Controller Touch Interface 1U-44HP (stock MTL)
Synthrotek Ribbon Controller Touch Interface 1U-44HP (stock MTL)
$56.00  $48.00
Synthrotek VCA Kit
Synthrotek VCA Kit
$112.00  $95.00
Synthesis Technology E340 Cloud Generator VCO (stock MTL)
Synthesis Technology E340 Cloud Generator VCO (stock MTL)
$499.00  $399.00
Synthrotek DS-M
Synthrotek DS-M
$243.00  $207.00
Synthrotek MST Noise Sample & Hold Mixer Kit
Synthrotek MST Noise Sample & Hold Mixer Kit
$105.00  $89.00
Pittsburgh Modular Crush (stock MTL)
Pittsburgh Modular Crush (stock MTL)
$249.00  $199.00
Synthrotek MST VCO
Synthrotek MST VCO
$336.00  $286.00
Synthrotek 308 Distortion
Synthrotek 308 Distortion
$138.00  $117.00
Synthrotek MST Ribbon Controller PCB & Panel (stock MTL)
Synthrotek MST Ribbon Controller PCB & Panel (stock MTL)
$28.00  $24.00
Synthrotek Ribbon Controller Touch Interface 3U-4HP (stock MTL)
Synthrotek Ribbon Controller Touch Interface 3U-4HP (stock MTL)
$41.00  $35.00
Qu-Bit Electronix Tri-Ger
Qu-Bit Electronix Tri-Ger
$523.00  $375.00
Synthrotek Atari Punk Console Kit (stock MTL)
Synthrotek Atari Punk Console Kit (stock MTL)
$84.00  $71.00
Pittsburgh Modular Mix Mult (stock TO)
Pittsburgh Modular Mix Mult (stock TO)
$109.00  $87.00
Synthrotek Dirt Filter
Synthrotek Dirt Filter
$138.00  $117.00
Synthrotek Universal Power Brick PS-15V6A-U (stock MTL)
Synthrotek Universal Power Brick PS-15V6A-U (stock MTL)
$35.00  $30.00
Verbos Electronics Touchplate Keyboard
Verbos Electronics Touchplate Keyboard
$1,230.00  $900.00
Delptronics LDB-1X
Delptronics LDB-1X
$137.00  $68.50
Synthrotek Either Or (stock TO)
Synthrotek Either Or (stock TO)
$173.00  $147.00
Synthrotek MST Midi to CV Converter Module
Synthrotek MST Midi to CV Converter Module
$280.00  $238.00
Synthrotek DS-M Kit
Synthrotek DS-M Kit
$140.00  $119.00
Synthrotek Mean Well Power Brick PS-15V6A-U
Synthrotek Mean Well Power Brick PS-15V6A-U
$74.00  $63.00
Synthrotek MST Low Pass Filter Kit
Synthrotek MST Low Pass Filter Kit
$140.00  $119.00
Synthrotek Dirt Filter Eurorack Kit
Synthrotek Dirt Filter Eurorack Kit
$84.00  $71.00
Pittsburgh Modular Midi 3
Pittsburgh Modular Midi 3
$299.00  $239.00
Pittsburgh Modular Game System (stock MTL)
Pittsburgh Modular Game System (stock MTL)
$369.00  $295.00
Synthesis Technology E350 Morphing Terrarium VCO (stock TO)
Synthesis Technology E350 Morphing Terrarium VCO (stock TO)
$519.00  $415.00
Pittsburgh Modular Chain Reactor (MTL stock)
Pittsburgh Modular Chain Reactor (MTL stock)
$349.00  $279.00
Bastl Instruments Spa DIY Kit
Bastl Instruments Spa DIY Kit
$108.00  $94.00
Synthrotek MST VCO Kit
Synthrotek MST VCO Kit
$210.00  $179.00
Synthrotek MST Low Pass Filter Module
Synthrotek MST Low Pass Filter Module
$231.00  $196.00
Dave Jones Design O'Tool+
Dave Jones Design O'Tool+
$422.00  $399.00
Pittsburgh Modular Patchblock (stock TO)
Pittsburgh Modular Patchblock (stock TO)
$118.00  $94.00
Synthrotek Roboto DIY Kit (stock MTL)
Synthrotek Roboto DIY Kit (stock MTL)
$140.00  $119.00
Synthrotek MST Dual Envelope Module
Synthrotek MST Dual Envelope Module
$315.00  $268.00
Dreadbox Omikron Module (stock MTL)
Dreadbox Omikron Module (stock MTL)
$559.00  $447.00
Snazzy FX Ardcore
Snazzy FX Ardcore
$429.00  $343.00
Snazzy FX Tidal Wave
Snazzy FX Tidal Wave
$605.00  $484.00
Synthrotek MST Dual VCA Mixer Kit
Synthrotek MST Dual VCA Mixer Kit
$119.00  $101.00
Pittsburgh Modular Phase Shifter (stock MTL)
Pittsburgh Modular Phase Shifter (stock MTL)
$459.00  $367.00
Pittsburgh Modular Lopass Gate
Pittsburgh Modular Lopass Gate
$282.00  $225.00
Synthrotek VCA
Synthrotek VCA
$166.00  $141.00
Synthrotek Atari Punk Console Module
Synthrotek Atari Punk Console Module
$133.00  $113.00
Audio Damage Kompressor ADM10
Audio Damage Kompressor ADM10
$307.00  $299.00
Synthrotek Combine Or
Synthrotek Combine Or
$138.00  $117.00

Copyright © 2018 MOOG AUDIO
Webmaster