Voltage controlled sampler module which can also be used as wavetable oscillator and simple digital effect device.
Due to its audio resoultion of 8bit, the A-112´s sound is comparable to early samplers that are quite rough but can be distinctive and somewhat charming.
In combination with the wavetabe oscillator function the A-112 makes up an interesting additional sound source for the modular system.
Sampling:audio resoultion: 8 bit, depending of the sample rate the sampling time is between 1s and 30s.
Two banks of non volatile memory at 64kB. Audio input with attenuator, overload display in record mode.
Tune control for setting the sample rate when recording and playing mode. CV input (~1V/oct) for pitch.
Triggering a sample with a gate signal or at the push of the button. MIDI-dump of the sample is possible via SysEx.
Wavetable: Each memory bank contains 256 pages (= wavetables) at 256 bytes. Ideally the wavetable is being loaded via MIDI but for extreme sounds you can use the recorded sample!
Choosing one of the 256 wavetables with a CV at the audio input. Moving through the wavetable with a CV at the CV input. effects: Simple effects like delay, reverse delay, pitch shift, freeze...
MIDI In Out; Gate In, CV In, Audio In (=Wave CV In), Audio Out
3U Eurorack module / module width 10 HP / depth (from back of faceplate): 100mm / power consumption 50mA / weight: ca. 180g