Plug in to all-tube tone that takes no prisoners! The incredibly versatile Renegade-65 is a 2-channel powerhouse that gives you the tools to forge your sound and the power to move some serious air in any size venue. Channel 1 produces lush, three dimensional clean tones with just a bit of grunt when you dig in.

Channel 2 starts with a sweet, bluesy overdrive, but pushing the gain opens the floodgates, unleashing enough thick, harmonically rich distortion to satisfy the most demanding player. Both channels offer an independent 3-band EQ, Egnater’s BRIGHT and TIGHT switches and a Wattage Selector switch that lets you choose between an intimate 10W or a wall-shaking 50W. Master Presence and Density knobs let you sculpt the high and low-end response.

Assign the REVERB, EFFECTS LOOP and MAIN 2 Volume
to just Channel 1, just Channel 2 or both right from the pedal

At the heart of this tone machine, you’ll find five 12AX7 preamp tubes and a power section fueled by two 6L6s and two EL34s. Renegade-50 features the ground-breaking TUBE MIX function on each channel, allowing you to blend the deep Californian character of the 6L6s with the aggressive British midrange punch of the EL34s. There are independent reverb controls for each channel, dual footswitchable master volumes and a speaker-emulated line out. The included 4-button footswitch controls much more than just channel switching. It also engages the on-board reverb, effects loop and secondary master volume with channel-assigning switches for all three. Run them on both channels or just the one you choose. The Renegade-50 is available in a head and 1x12”, 2x12” and 4x10” combo versions.

RENEGADE-50 TUBES
* 5 x 12AX7
* 2 x 6L6
* 2 x EL34

Renegade-50 Features
* 65-Watt Tube Amp
* Two Independent Channels Each With:
—    Volume, Gain, 3-Band EQ
—Tight and Bright Voicing Switches
—    10w/50w Wattage Selector Switch
—    Tube Mix Knob Blends 6L6 and EL34 Power Tubes
* Master Controls:
—    Presence & Density
—    Reverb with Level Setting for Each Channel
—    Main and Secondary Master Volume    * Rugged Four-Button Footswitch
—    Assign the REVERB, EFFECTS LOOP and MAIN 2 Volume to just Channel 1, just Channel 2 or both using small switches right on the pedal
*    Simple master bias adjust with test points
*    Effects Loop
*    Cabinet Voiced Line / Recording Out Using XLR / 1/4” Combo Connector
*    100V / 115V / 230V Voltage
Selector
*    Rugged Birch Construction
*    Heavy Duty Cover Included