more
0 items
 
Advanced Search
English French


Official PayPal Seal
Privacy Notice
Conditions of Use
Payments, Shipping & Returns
About Us
Contact Us
Make Noise Brains
[brains]
$159.00

BRAINS is a clocked sequential binary event machine, intended to be connected to tactile controllers such as the Pressure Points.

Once connected, Pressure Points provides data input to BRAINS in the form of touch selectable Reset stage and Hold stage. Pressure Points also provides the tuned voltages and patchable Reset Pulses per stage. BRAINS, when connected to either 1 or 2 Pressure Points, will drive the stage selection in a sequential fashion, at a rate determined by the incoming clock at CLocK IN, thus forming a 4-Step or 8-Step 3-channel analog sequencer. Binary control over Direction of the stage selection, RUN/ Stop and ReSeT are provide. The Touch-GATE OUT is the only output on BRAINS, producing a Gate HIGH signal whenever a Pressure Points is touched.

The Touch-CLocK IN serves a dual purpose. Used without a Master Clock applied to the CLocK IN, Events initiated by touching Pressure points will be Quantized to the timing signal applied to Touch-CLocK IN. When used along with the CLocK IN, a secondary sequence will be initiated whenever Pressure Points is touched, where the length and timing is determined by the relationship of the Touch-CLocK to the Master CLocK. Even divisions of the Master CLocK will produce tame variations of the main sequence. Non-Synchronized clocks will produce???

BRAINS will function at speeds well beyond the threshold of human hearing. Analog or digital signals rising quickly to at least 1V are valid and will be recognized by BRAINS as a binary HIGH or ON, signals below 1V are considered LOW, or OFF.
BRAINS operates from a single supply, needing only +12V and Ground connected, and may thus be powered with a wall-wart. BRAINS will, of course, operate perfectly powered from the dual supplies found in euro rack format cases from Doepfer, MonoRocket, MW. Having the single supply operation allows for greater ease in building of custom or DIY enclosures.

The faceplate for the BRAINS is a printed circuit board. It is black, with white and gold graphics.

This module is 4HP  and consumes 10mA worth of current. It ships with all cables needed for expansion of one or two Pressure Points. Eight (expansion of 2 Pressure Points) is the maximum number of Pressure Points stages that may be connected to a BRAINS.



For more information, please visit this products webpage.
For stock information, please email info@moogaudio.com.
This product was added to our catalog on Monday 08 November, 2010.
Reviews
Customers who bought this product also purchased
Synthrotek Keyed 16 Pin Eurorack Power Cable
Synthrotek Keyed 16 Pin Eurorack Power Cable
Mutable Instruments Volts
Mutable Instruments Volts
Moog Music Mother-Skiff12 Case 60HP
Moog Music Mother-Skiff12 Case 60HP
Dreadbox White Line Attenuator
Dreadbox White Line Attenuator
Sputnik Modular Selector
Sputnik Modular Selector
Make Noise Ltd. Edition Blk & Gold CV Bus System (special order)
Make Noise Ltd. Edition Blk & Gold CV Bus System (special order)
Pittsburgh Modular Midi 3
Pittsburgh Modular Midi 3
$299.00  $239.00
Endorphin.es Terminal (TO stock)
Endorphin.es Terminal (TO stock)
$745.00  $596.00
Dave Jones Design O'Tool+
Dave Jones Design O'Tool+
$422.00  $399.00
Dreadbox Theta Module (stock MTL)
Dreadbox Theta Module (stock MTL)
$379.00  $300.00
Pittsburgh Modular Chain Reactor (MTL stock)
Pittsburgh Modular Chain Reactor (MTL stock)
$349.00  $279.00
Pittsburgh Modular Lifeforms System 101 (MTL stock)
Pittsburgh Modular Lifeforms System 101 (MTL stock)
$1,189.00  $951.00
LZX Industries Color TBC (stock MTL)
LZX Industries Color TBC (stock MTL)
$523.00  $418.00
Mutable Instruments Peaks
Mutable Instruments Peaks
$259.00  $207.00
Dreadbox Omikron Module
Dreadbox Omikron Module
$559.00  $447.00
Dreadbox Gamma Module
Dreadbox Gamma Module
$579.00  $463.00
Qu-Bit Electronix Tri-Ger
Qu-Bit Electronix Tri-Ger
$523.00  $375.00

Copyright © 2017 MOOG AUDIO
Webmaster