|
A heavily modified Big Muff style, cascaded gain stage circuit designed with bass in mind, but equally suited for guitar. Including extended usable gain range and tone stack functionality, independent active clean blend circuit, huge available gain, true bypass, STARVE and FEED functions for the noise inspired, and tons of tonal and textural possibilities. Truly not your average fuzz box. www.martoneaudio.com for details.
A Big Muff Pi inspired Fuzz/Dist/Boost with Clean Blend & more controls than time zones in the former Soviet Union
Ultimate Muff Control!!!
8 Knobs!!!
4 Switches!!!
More Muff Than Yr' Mom!!!
Pre Gain - Sets Drive Out Of the Input Buffer
Post Gain - Sets Gain Of First Clipping Stage
Clip - Engague Or Disable First Clipping Stage
Starve - Set Drive, Saturation, Character, and Headroom
Feed - Engage And Adjust Feed For Internal Oscillation
Bass - HP Filter For Bass Cut Disabled In Tone Bypass
Treble - LP Filter For High Cut Disabled In Tone Bypass
Tone - Mid-Notch, Full Range, Or Bypass Tone Stage
Muff Vol - Separate Muff Output Volume With Increased Maximum Output
Clean Vol - Full Actuve Clean Volume/Blend Boos Available & Bass Approved
PLUS! 'Boss Style' DC Jack! True Bypass! Status LED!
Tips:
‘Post’ in about 3:00 position is close to “stock’ muff.
Try using FEED and STARVE together for further tonal mayhem. With some settings, engaging the 1st stage clipping (down) will also serve as a Bass Cut. (helpful with ‘TONE’ is in center stage).
With ‘TONE’ switch in center position, rolling back the starve may cause Oscillations. Engage the tone stack to control this.
LED will dim as you roll back the ‘STARVE’ knob. Brightest LED = full power.
When FEED is engaged and turned up to max, you will get only internal feedback, (oscillation) and NO guitar from the fuzz side. Clean blend (if present) should still work.
|