The ZEUS Passive Bus Board has the ability to connect to most 12V power supplies of your choosing.
The ZEUS Passive Bus Board Will need to be wired from your 12V power supply using either the Screw Terminals located in the front, or the Flat Terminals located on the back of the board.
When wiring using either connection format, please make sure to wire a jumper from the +12V connection to the VR connection. This will power the +5V rail used in conjunction with module requiring the extra 5V current.
+5V Output: 220mA* max. Eurorack Connectors: 14. Analogue Systems Connectors: 5. Flat Terminal Inputs: 1 set. Screw Terminal Inputs: 1 set. Flat Terminal Outputs: 1 set.