Free shipping Allowance
On most orders - Click here for details

More Views

All
FURMAN P-8-PRO-C
$465

Availability Special Order

Furman P-8 Pro C Power Conditioner
Express Checkout

Description

The P-8 Pro C from Furman is a Classic Series Power Conditioner in a sturdy rack-mountable design. It can be utilized as a voltage surge suppressor for instrument rigs, recording studios, DJ setups, live sound installations, and more.

The P-8 Pro C power conditioner has the following three stages of protection: Series Multi-Stage Protection (SMS), Linear Filtering Technology (LIFT), and Extreme Voltage Shutdown (EVS). Together they provide a comprehensive transient voltage surge suppressor system to protect your gear.

There are several other built-in features of the P-8 Pro C such as the 20 Amp rating, nine total AC outlets, a BNC lamp connector on the rear panel, isolated outlet banks, three widely spaced wall wart outlets, and LED diagnostic lights.

Instrument Rigs 
The P-8 Pro C Power Conditioner defends your gear from the spikes and surges that are so common at gigs and practice spots. With its Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp
Recording 
It can lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges
DJ Equipment 
Bars, clubs, and other event venues have some of the most unpredictable power out there. From air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. The P-8 Pro C Power Conditioner keeps the bad stuff out
Pro Audio 
When you're out there gigging, you never know what kind of power you're going to get. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them the power they can trust

Technical Specifications

Maximum Current 20 A
Operating Voltage 90 to 140 VAC
Over Voltage Shutdown 140 VAC typically
Spike Protection Line to neutral, zero ground leakage
Spike Clamping Voltage 188 Vpk @ 3,000 A (133 VAC RMS)
Maximum Surge Current 6,500 A
Frequency 50/60 Hz
Noise Attenuation 10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz. Linear attenuation curve from 0.05 - 100 ohms line impedance
BNC Connector With Switch: Rear rack lamp, 12 VAC 500 MA max (lamp not included)
Power Consumption 12 W
Safety Agency Approval CSA UL1449, CE, NRTL-C
Dimensions (W x D x H) 19 x 10.5 x 1.75" (48 x 27 x 4.4 cm)
Weight 11 lbs (5 kg)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×