Bundles
NEUMANN KM 184 STEREO SET
$1,880

Availability Special Order

Cardioid Microphones
MICROP-NEU-00035
Express Checkout

Description

Experienced users often describe the sound of our small diaphragm microphone as „fresh“ and „vivid”. This is – among other factors – due to a slight treble lift around 9 kilohertz. The KM 184 is an experienced all-rounder, a mic for all seasons. It captures virtually any instrument with amazing complexity and depth of sound.

 

Another advantage: thanks to the extremely tight production tolerances, all KM 184 microphones produce a very consistent sound. Therefore, they can easily be used as a stereo pair with exact spatial imaging for all stereo recording methods.

 

FEATURES

  • Versatile small membrane microphone primarily for instrumental recordings
  • Slight treble lift for fresh and vivid sound
  • Precise cardioid directionality with excellent rejection of rearward sound
  • Uncolored reproduction of neighboring sound sources
  • Tight production tolerances – perfect for stereo recordings

Technical Specifications

  • Acoustical operating principle: Pressure gradient transducer
  • Directional pattern: cardioid
  • Frequency range: 20 Hz ... 20 kHz
  • Sensitivity at 1 kHz into 1 kohm: 15 mV/Pa
  • Rated impedance: 50 ohms
  • Rated load impedance: 1 kohms
  • Equivalent noise level, CCIR1): 22 dB
  • Equivalent noise level, A-weighted1): 13 dB-A
  • Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL): 72 dB
  • Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL): 81 dB
  • Maximum SPL for THD 0.5%2): 138 dB
  • Maximum output voltage: 10 dBu
  • Supply voltage (P48, IEC 61938): 48 V ± 4 V
  • Current consumption (P48, IEC 61938): 3.2 mA
  • Matching connectors: XLR 3F
  • Weight approx.: 80 g
  • Diameter: 22 mm
  • Length: 107 mm

______________________________________________
1) according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) measured as equivalent el. input signal

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×