This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables.
The cartridge offers excellent channel separation and low distortion for outstanding tonal quality.
The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
- VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus
- Aluminum cantilever
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
Frequency Response 20-25,000 Hz Channel Separation 23 (dB at 1 kHz) Vertical Tracking Force 1.8-2.2 g (2.0 g standard) Stylus Construction Nude square shank Recommended Load Impedance 47,000 ohms Output 3.5 mV (1 kHz, 5 cm/sec.) Channel Balance 1.5 dB (1 kHz) Stylus Shape 2.7 x 0.26 mil Shibata Cantilever Aluminum pipe Mount Half-inch Replacement Stylus AT-VMN95SH
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Load Capacitance: 100 to 200 pF
Coil Inductance: 550 mH (1 kHz)
Vertical Tracking Angle: 23°
Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Weight: 6.1 g (0.22 oz)
Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver