VM95 series Shibata stereo cartridge on AT-HS6 Headshell
- AT-VM95SH mounted on AT-HS6BK headshell
- The total set weight is 15.5g
- Assembled and tested in the Audio-Technica Factory in Fukui-Japan
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
|Type||VM Stereo Dual Magnet|
|Frequency Response||20 - 25,000 Hz|
|Channel Separation||23 dB (1 kHz)|
|Output Channel Balance||1.5 dB (1 kHz)|
|Output Voltage||3.5 mV (@ 1 kHz, 5 cm/sec)|
|Vertical Tracking Angle||23°|
|Vertical Tracking Force Range||1.8 - 2.2g (standard 2.0 g)|
|Stylus Size||2.7 x 0.26mil|
|Stylus Construction||Nude Square Shank|
|Coil Impedance||3.3 kΩ (1 kHz)|
|Coil Inductance||550 mH (1 kHz)|
|DC Resistance||485 Ω|
|Static Compliance||20 x 10 – 6 cm / dyne|
|Dynamic Compliance||10 x 10 – 6 cm / dyne (100 Hz)|
|Wire Used for Coil||T.P. Copper|
|Recommended Load Impedance||47,000 Ω|
|Recommended Load Capacitance||100-200 pF|
|Dimensions||21.2 × 21.4 × 62.4 ( H x W x D mm)|