Covid-19 - Please favor the email over the phone when contacting us: MTL: montreal@moogaudio.com WEB: sales@moogaudio.com
Please note that due to our reduced staff and our busy carriers, delivery times may take longer than usual. You can always use our Facebook page as well to contact us.

More Views

Turntable
AUDIO-TECHNICA AT-LPW40WN
$449.99

Availability Special Order

Fully Manual Belt-Drive Turntable
4961310146573
Express Checkout

Description

  • The AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM. 

    The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. 

    The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.
    • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM

    • Motor features a speed-sensor system to maintain accurate platter rotation speed

    • Fully manual operation

    • Adjustable dynamic anti-skate control

    • Professional anti-resonance, die-cast aluminum platter with rubber mat

    • AT-HS4 universal ½"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus

    • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application

    • Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest

    • Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer

    • Built-in switchable phono pre-amplifier for phono or line-level output

    • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Technical Specifications

Type 2-speed, fully manual operation
Motor DC servo motor w/speed stability control
Drive Method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminum
Wow and Flutter 0.15% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio >60dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec 
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
Power Supply Requirements 100-240V AC, 60 Hz
Power Consumption 1 W
Dimensions 420.0 mm (17.13") W x 340.0 mm (13.90") D x 116.9 mm (5.04") H
Weight 4.7 kg (10.4 lbs.)
Accessories Included AT-VM95E phono cartridge; AT-HS4 headshell; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; rubber mat; dust cover; 45 RPM adapter




Tonearm type: Balanced straight tonearm with detachable headshell 
Effective arm length: 223.6 mm 
Overhang: 18.6 mm 
Tracking error angle: <2 degrees 
Applicable cartridge weight: 12-17 g 
Anti-skating range: 0-3 g 
Replacement Stylus: AT-VMN95E

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×