DOEPFER A-100LC1 LOW COST CASE WITH BUILT IN POWER SUPPLY
LOW COST CASE WITH BUILT IN POWER SUPPLY
Credit offered by . Get pre-approved at the checkout!
Out of Stock
Reserve your unit now!
The A-100LC1 is very similar to the A-100LC3 but offers only 48 HP for installation of modules. A-100LC3 is equipped with the power supply A-100SSB. The case is made of raw wood without laquering. The case can be varnished by the customer in any desired color e.g. by means of a spray can.
- Measures in mm:
- outside: approx. 262 (width) x 158 (depth) x 154 (height)
- inside: 1 x 48 HP (244 mm) x 3 U (one short bus board), useable depth for A-100 modules: approx. 110/45 mm (measured from inner side of the front panel until end of the pc board of the module), because of the built in power supply the depth is reduced at the right side:
|Vendor Item Number||A-100LC1|
Write Your Own Review