JBL EON610 Two-Way 10" 1000W Powered Portable PA Speaker with Bluetooth Control

Credit offered by PayBright . Get pre-approved at the checkout!

Out of Stock
Reserve your unit now!

Designed to deliver high-quality audio, the 10" JBL EON610 is a highly flexible, easy to use, 1000W powered portable PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers.

The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, the EON610 is well equipped to cover an audience of up to 200.

A push button on the back of the speaker allows you to physically switch between four different modes: Main, Monitor, Speech, and Sub for incorporating a dedicated subwoofer to extended low-end performance. There is also a built-in EQ, which is available via the Bluetooth control application for iOS and Android devices.

Two mono inputs, each with a combo mic/line XLR-1/4" connector, feature individual signal gain knobs and a master volume knob for the overall level. The two mono inputs are mixed to a mono signal internally, while an XLR loop-thru allows you to route the signal to an additional EON600 series speaker for extending the mono signal for better coverage. For a true stereo L/R operation, two EONs are needed with each to receive independent the left and right signals respectively.

The highly efficient 1000W Class-D amplifier powers the 10" woofer and 1" compression driver, which provide full-range audio (60 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. JBL's proprietary Image Control Waveguide offers a 110 x 60° (HxV) coverage pattern and is designed to deliver a more consistent sound to the audience, while keeping the audio off the ceiling and walls. The EON610 includes a power cord.

At a Glance

  • System Type: Self-powered 10”, two-way, bass-reflex
  • Lightweight, rugged polypropylene enclosure can withstand the rigors of on-the-road wear and tear
  • JBL Premium Transducers: High-quality 10" woofer and 1" compression driver are designed for the EON Series
  • 1000 W highly efficient Class-D amplification is matched to power the JBL transducers
  • Maximum SPL Output: 124 dB provides coverage of up to 200 people
  • Wide frequency response (60 Hz to 20 kHz -3 dB) delivers full-range audio performance for an accurate representation of the source material
  • 110 H x 60° V coverage pattern keeps the sound on the audience and off the walls and ceiling
  • Standard 35mm pole cup with stabilizing screw for use with speaker stands and speaker poles

Wireless Bluetooth Control over DSP

  • Built-in DSP processor with Bluetooth v.4 control through an iOS or Android control application, EON600 app
  • Wireless control over the speaker's 3-band parametric EQ, high- & low-EQ, saving and recalling presets, and adjusting the master volume
  • Control up to 4 EON speakers with the EON600 app
  • Disable the speaker's front LED indicator light
  • Fine tune the speaker in different acoustic environments

JBL Engineered Presets for Quick and Easy Setup

  • Main:
    • Use this setting when your EON610 is being used either on a tripod or pole and facing towards your audience
  • Monitor:
    • Use this setting when your EON610 loudspeaker is being used as a stage monitor facing towards you
  • Sub:
    • Use this setting when your EON610 loudspeaker is being used in conjunction with a separate subwoofer. This preset enables a High-Pass Filter (HPF) set at 100 Hz
  • Speech:
    • Use this setting when your EON610 loudspeaker is being used for Speech only or Spoken Word only applications and is facing towards the audience

Flexible Applications and Configurations

  • Floor Monitor
    • Use on its side
    • Use vertically
  • Main PA
    • Suspended from above
    • Placed on a tripod stand
    • Placed on a pole mount on top of a subwoofer
    • Stacked on top of one another using their molded index feet
PA Speaker
Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker
Total Power Capacity 1000 W Peak 
500 W Program 
Amplifier Power Rating LF:
700 W Peak 
350 W Program 
300 W Peak 
150 W Program 
Amplifier Class Class-D
HF Driver 1 x 1" / 25.4 mm Horn-Loaded Polymer Compression Driver
LF Driver 1 x 10" / 254 mm Woofer
Magnet HF:
Frequency Range 52 Hz to 20 kHz -10 dB
Frequency Response 60 Hz to 20 kHz ±3 dB
Maximum SPL 124 dB
Coverage Angle 110° H x 60° V
Max Input Level Mic Input:
-4 dBu (Balanced) 
Line Input:
+14 dBu (Balanced) 
Audio I/O 2 x Combo XLR-1/4" TRS Input
1 x XLR 3-Pin Thru
Signal Processing
Crossover 1.8 kHz
EQ 3 x Presets (User) 
1 x LF Shelf 
1 x HF Shelf 
Parametric EQ Yes
Digital Signal Processing Voicing Modes
AC Input Power Universal:
100 to 240 VAC, 50 / 60 Hz 
AC Power Connector 1 x IEC
Current Consumption 120 VAC:
1.14 A (1/8 Power) 
1.71 A (1/4 Power) 
2.03 A (1/3 Power) 
Mounting 1 x 1.38" / 35 mm Pole Socket (Bottom)
3 x M10 Fly Point
Handles 4
Construction Material Polypropylene, Steel
Dimensions 22 x 12.7 x 11.6" / 55.8 x 32.2 x 29.5 cm
Weight 26 lb / 11.7 kg
More Information
Price $647.99
Vendor Item Number EON610
Special Order 1
Coming Qty 0
Manufacturer JBL Industries
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account