Credit offered by . Get pre-approved at the checkout!
Out of Stock
Reserve your unit now!
The 2-in/4-out Rubix24 USB audio interface from Roland offers a balance of high-fidelity sound, solid build quality, compact size, and powerful features, which give you studio-grade performance just about anywhere you choose to record.
The Rubix24 is equipped with two low-noise mic preamps and a Hi-Z jack input for guitars or other high impedance sources. It supports audio resolution up to 24-bit/192 kHz and features class-compliant Mac and Windows drivers, for low latency. Four individual balanced outputs give you additional options for routing and monitoring setups.
The unit also features a hardware compressor/limiter to help ensure you capture a hot signal without clipping or unwanted distortion, and big level indicators that clearly show if a channel has incoming signal or if you're going to overload, critical for working in low-level light environments such as stages.
The Rubix24 is well equipped to meet the rigors of the road. Its sturdy and compact metal construction, extensive shielding, and ground lift effectively protect it against radio frequency interference and electrical hums, often found in live venues.
Connect your Rubix24 to an iPad, and using the included Ableton Live Lite software, turn it into a compact system for on-location productions.
- 2-in/4-out USB audio interface
- 2 low-noise mic preamps with XLR-1/4" combo jacks
- Hi-Z input for guitar and other high-impedance sources
- MIDI In/Out ports
- High-resolution audio up to 24-bit/192 kHz
- Low-latency class-compliant drivers for Mac OS, Windows, iPad
- Hardware compressor/limiter
- Big, easy-to-read indicators show vital information
- Ground lifts for quiet operation in a variety of venues
- Extensively shielded, low-noise design
- Sturdy and compact metal construction
- Includes Ableton Live Lite
|Channels||Record: 2 channels
Playback: 4 channels
|Signal Processing||Interface: 24-bit
AD/DA conversion: 24-bit
|Sampling Frequency||AD/DA Conversion: 44.1, 48, 96, 192 kHz|
|Connectors||Input (1L, 2R) Connectors: XLR, balanced, phantom power (+48 V, 6 mA max.)
Input (1L, 2R) Jacks: 1/4" TRS phone, balanced, input 1L supports high impedance
Phones Jack: Stereo 1/4" phone
Output (1L, 2R, 3L, 4R) Jacks: 1/4" TRS phone, impedance balanced
MIDI (In/Out) connectors
USB port: USB Type-B
5 VDC Port: USB Micro-B
|Controllers||SENS 1L, 2R, knobs
48 V switch
COMP/LIMIT TYPE switch
POWER SOURCE switch
DIRECT MONITOR knob
GROUND LIFT switch
|Indicators||Level indicators (1L, 2R)
Level indicator (COMP/LIMIT)
48 V indicator
|Nominal Input Level||Input (1L, 2R) Connectors (XLR): -60 to -12 dBu
Input (1L, 2R) Jacks (1/4" TRS Phone): -44 to +4 dBu
|Maximum Input Level||Input (1L, 2R) Connectors (XLR): +2 dBu
Input (1L, 2R) Jacks (1/4" TRS Phone): +18 dBu
|Nominal Output Level||Output (1L, 2R, 3L, 4R) Jacks: -6 dBu, impedance balanced|
|Maximum Output Level||Output (1L, 2R, 3L, 4R) Jacks: +8 dBu, impedance balanced
Phones Output: 20 mW + 20 mW / L + R, 47 Ohms load
|Input Impedance||Input (1L, 2R) Connectors (XLR): 4 kOhms or greater (balanced)
Input (1L, 2R) Jacks (1/4" TRS Phone): 15 kOhms or greater (balanced)
Input (1L) Jack (1/4" Phone): 500 kOhms or greater when Hi-Z is turned on
|Output Impedance||Output (1L, 2R, 3L, 4R) Jacks: 2 kOhms, balanced
Phones Jack: 47 Ohms
|Residual Noise Level (IHF-A, typ.)||Input (1L, 2R) to Output (1L, 2R): -94 dBu typ. (SENS 1L, SENS 2R knobs: min., input terminated with 600 Ohms, IHF-A, typ.)|
|Dynamic Range||AD Block Input (1L, 2R) Jacks: 104 dB typ. (SENS 1L, SENS 2R knobs: min.)
DA Block Output (1L, 2R, 3L, 4R) Jacks: 109 dB typ.
|Power Supply||Supplied from computer via USB, 5 VDC|
|Current Draw||500 mA|
|Operating System||Windows 7, 8, 8.1,10
Mac OS X 10.10 or later
iPad iOS 9 or later
|Dimensions (W x D x H)||7.2 x 6.5 x 1.8" / 183.0 x 165.0 x 46.0 mm|
|Weight||2.6 lb / 1.2 kg|
|Package Weight||3.9 lb|
|Box Dimensions (LxWxH)||10.8 x 8.9 x 3.4"|
|Vendor Item Number||RUBIX24|