More Views

AD/DA Converter
Tascam ML-32D
$2,785

Availability Special Order

Dante / Analog Converter
ML-32D
Express Checkout

Description

The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.

A poweful and flexible solution, the TASCAM ML-32D has 4 D-Sub intputs and 4 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.

 

Features:

  • Dante-focused interface for connection of external audio in or out of a Dante audio network.
  • 32-channel analog line input and 32 analog line outputs (48 kHz / 96 kHz) using 8 D-Sub connectors.
  • Dual redundant Ethernet jacks which support both primary and secondary connections.
  • Up to 24-bit / 96 kHz quality.
  • LED display for signal level and overload per input/output channel.
  • Reference level dip switches for selectable dBu level metering.
  • Firmware updatable via Dante port.
  • AES67 and Revenna compatible.

Technical Specifications

Channels of I/O 32
Formats Supported 44.1/48 kHz, 16/24-bit
88.2/96 kHz, 16/24-bit
Primary Connectors RJ-45
Transmission Protocol: Dante
Gigabit Ethernet Standard: 1000 BASE-T (IEEE 802.3 ab)
Cables: Category 5e or faster STP cables
Analog Outputs Connector: 8x D-Sub 25-pin
Locking Screws: No. 4-40 UNC (inch type)
Nominal Output Levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)
Maximum Output Levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by Ref. level switches)
Output Impedance: 200 Ohms or lower
Applicable Load Impedance: 2 kOhms or higher
Analog Inputs Connector: 8x D-Sub 25-pin
Locking Screws: No. 4-40 UNC (inch type)
Nominal Output Levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)
Maximum Input Levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by Ref. level switches)
Input Impedance: 10 kOhms or higher
* 0 dBu=0.775 Vrms
Audio Performance
Frequency Response +0.1 dB/-0.5 dB: 20 Hz / 20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA)
+0.1 dB/-0.5 dB: 20 Hz / 40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
Total Harmonic Distortion (THD) + N 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Signal to Noise Rate 113 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)
Cross Talk 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Dante Network
Frequency Response +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA)
+0.1 dB/-1.0 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
Total Harmonic Distortion (THD) + N 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Signal to Noise Ratio 110 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)
Crosstalk 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Other Features
Power AC100 to 240 VAC, 50/60 Hz
Power Consumption 22 W
Dimensions (W x H x D) 19.0 x 1.8 x 12.0" (483 x 45 x 303.8 mm)
Operating temperature 32 to 104°F (0 to 40°C)
Weight 7.7 lb (3.5 kg)
Packaging Info
Package Weight 11.55 lb
Box Dimensions (LxWxH) 21.6 x 16.9 x 5.9"

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×