Plus de vues

PCI & Ethernet
FOCUSRITE REDNET D16R
2 799 $

Disponibilité Commande spéciale

Interface AES3 I/O pour Dante sur Réseau IP
REDNET D16R

Description

Le RedNet D16R dispose de 16 canaux d’E/S AES/EBU à partir d'un réseau audio Dante.

Parfait pour interconnecter des consoles numériques entre elles, amplificateurs de puissance ou tout autre équipement audio doté de connectiques AES3 et un réseau Dante.

Le RedNet D16R permet la conversion de fréquence d’achantillonage (SRC) sur chaque paire d'entrées, pour un fonctionnement instantané avec n'importe quelle source AES3. Des connexions Word Clock et DARS (signal audio numérique de référence) fournissent la synchronisation pour un large éventail de matériel, tandis que les E/S S/PDIF permettent l'intégration d'équipements type CD ou lecteurs /enregistreurs.

• Redondance des ports Ethernet ainsi que de l'alimentation
• Format compact rack 19 pouces 1U
• 16 canaux RedNet en interface AES3 pour réseau Dante
• Conversion de fréquence d’achantillonage sur tous les canaux SRC • Entrée et sortie sur XLR ainsi que DB25
• Entrée XLR pour DARS ou audio numérique • S/PDIF à 2 canaux d'E/S
• Word Clock E/S
• Routage et contrôle à distance

Spécifications techniques

Key Features

  • 16 Channel bi-directional RedNet AES3 Interface for Dante Networks
  • Power supply and Ethernet redundancy with auto switchover in case of failure, and locking etherCON network connectors.
  • Sample rate conversion allows external equipment to run at any sample rate
  • Compact 1U chassis allows maximum functionality in minimum rack space
  • Two 8-channel AES59 combined I/O DB25 connections, plus a pair of XLR3 connectors duplicating channels 1 & 2
  • Rear panel XLR input connector either be used as a DARS input or as a traditional AES3 audio input
  • S/PDIF input and outputs provided on RCA connectors; ideal for connecting CD players or solid-state recorders
  • Word Clock I/O on BNC connectors allows synchronisation of the Dante network  to house clock, or syncing external equipment to the Dante network
  • RedNet Control and Dante control software allow routing and control from your audio computer system via a software control panel – no hardware patching required

Input Sample Rate Converters

Sample Rate Range 32 to 216 kHz
Gain Error -0.3dB
Dynamic Range > 138dB (-60 dBFS method)
THD + N < -130dB (0.00003%); 0 dBFS input
Latency 11 to 45 samples (network and input sample rate dependent).

Digital Performance

Supported Sample Rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
Clock Sources Internal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master.
External Word Clock Range Nominal sample rate ±7.5%

Rear Panel Connectivity

AES/EBU

Channel Count 16 x 16 AES/EBU channels
Input and Output 2 x DB-25 connectors (AES59 Combined I/O / Tascam Digital)
Alternate Input (optional DARS) 1 x Female XLR (replaces DB-25 channels 1-2)
Alternate Output 1 x Male XLR (duplicates DB-25 channels 1-2)

S/PDIF

Channel Count 2 x 2 S/PDIF Channels (reduces AES/EBU input channels)
Input 1 x RCA phono socket (replaces DB-25 channels 3-4)
Output 1 x RCA phono socket (switchable, duplicates any DB-25 channel pair)

Word Clock

Input 1 x BNC 75Ω port (switchable termination)
Output 1 x BNC 75Ω port

PSU & Network Connections

PSU 2 x IEC Inputs with retaining clips.
Network 2 x etherCON connectors, also compatible with standard RJ45 connectors.

Front Panel Indicators

Primary PSU (A) Green LED. Illuminates when an AC input is applied and all DC outputs are present.
Secondary PSU (B) Green LED. Illuminates when an AC input is applied and all DC outputs are present.
Primary Network Green LED. Indicates that a network connection is present on primary port when in redundant mode. When in Switched mode, a valid network connection at either Primary or Secondary network port will cause this LED to illuminate.
Secondary Network Green LED. Indicates that a network connection is present on secondary port when in redundant mode. Not used in switched mode.
Network Locked Green LED. When unit is network slave, shows valid network lock. When unit is network master, shows lock to indicated clock source. Flashing indicates external clock is selected but not connected.
Sample Rate Orange LED for each: 44.1 kHz, 48 kHz, x2, x4.
Pull Up/Down Orange LED. Indicates unit is set to operate on a Dante pull up/down domain.
Signal Indicators 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS.
Clock Source Orange LED for each: Internal, Word Clock, DARS, Input 1–2 and Input 9–10.

Network Modes

Redundant Allows unit to connect to two independent networks.
Switched Connects both ports to integrated network switch allowing daisy-chaining of devices.

Dimensions

Height 44.5mm/ 1.75"
Width 482.6mm/ 19"
Depth 263mm/ 10.35"

Weight

Weight 3.84kg

Power

PSU 2 x Internal, 100-240V, 50/60Hz, consumption 30VA.

 

Mots clés du produit

Utilisez un espace pour separer les mots clés. Utilisez l'apostrophe (') pour rédiger une phrase.

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×